Details:
With the HL-DV7W, natural-looking, high-quality video acquired by digital processing ICs (ASICs) is digitally recorded onto a compact DVCAM tape without loss of image quality. Because this can capture up to 184 minutes of footage with a single tape (of standard size), it can eliminate time-consuming inconveniences associated with tape swapping during long hours of field production.
Additional Detailed Information:
New Digital Process LSI
New digital process LSI (ASIC) is adopted to produce high quality video including a six - axis linear matrix system for fine tuning of color to match broadcast requirements.
Low smear and high sensitivity CCD
High quality CCD are employed to reproduce good quality PIctures even under very low light condition.
+48dB Hyper Gain for very low light conditions
Hyper gain of +48dB is provided so that good video reproduction is assured even in the harshest shooting conditions.
DVCAM FORMAT
High Picture Quality Digital Component Recording
The DVCAM format is a digital system with Luminance signal (Y) and Color Difference signals (R-Y, B-Y).
PCM Digital Audio System
Two modes are selectable between 2ch (48kHz sampling frequency) and 4ch (32kHz sampling frequency) which may be useful for Audio After Recording (dubbing).
Long Recording Hours
Standard size cassettes have a max. 184 minutes recording time, while mini-cassettes have max. 40 minutes recording time.
Preset and Variable Shutters
The preset shutter has six speeds (1/100, 1/120, 1/250, 1/500, 1/1000, 1/2000 seconds) and variable speeds can be set between 1/60.3 and 1/787 seconds ( 1/50.3 and to 1/781 for PAL).
Diagonal Detail for higher picture quality
The diagonal detail function increases sharpness in the diagonal direction. This function also helps to reduce cross color moire in NTSC.
Skin Detail for favorable reproduction
The skin detail function is used when skin quality is being emphasized. The edge sharpness of the skin tone can be softened so that wrinkles or age lines become less visible on the TV screen. AHD, Auto Hue Detect, for easy setting of Skin tone detail is employed.
Soft Detail Function
To ensure picture uniformity even with high contrast areas, Soft Detail is employed to produce images that are more natural, without excessive adge enhancement.
Variable Detail Settings
8 step variable frequency boost of the detail signal and B/W balance function which controls center luminance level of detail signal are provided to have better detail effects depending on the subject.
HL-DV7W:2.97MHz to 6.84MHz at 4:3 mode
3.24MHz to 9.00MHz at 16:9 modeHL-DV5:2.97MHz to 6.84MHz
Various GAMMA settings
Not only are 4 types of GAMMA characteristics selectable (OFF/0.35/0.4 /0.45), but a GAMMA curve pattern with x5 initial gain is also selectable for certain broadcast requirement.
Black Press
To emphasize only the brighter areas of images, Black Press is provided. It is selectable in 3 steps (-7%, -5%, -3%). It can add contrast to a washed out picture.
Black Stretch
The black stretch function meets the needs of professional camera-persons who want to avoid excessive dark areas in high contrast scenes. With three settings (3, 5 and 7%), this function enables improvement in dark areas in the picture by lifting the image level of only low brightness areas.
Shock-less Auto White Balance
To avoid a sudden change in white balance when switching between white balance memories, change over time is selectable. This function exhibits superb results when the scene changes from an indoor to outdoor shot or vice versa.
OFF:Changes Memory Data instantlyON - 0.3s :Changes Memory Data in 0.3 seconds.ON - 0.5s :Changes Memory Data in 0.5 seconds.ON - 1.0s :Changes Memory Data in 1.0 seconds.ON - 1.5s :Changes Memory Data in 1.5 seconds.ON - 2.0s :Changes Memory Data in 2.0 seconds.
Convenient filter linked White Balance
The camera has a total of 8 AWB memory presets, A/B channel for each filter. The AWB is linked to the filter and automatically changes the white balance when the filter changes.
OFF:2 memories on A and BON - POS:2 memories, A and B for each filter
(8 ch for 3000K, 5600K + 1/16ND, 5600K, 5600K+1/64ND)ON - TEMP:2 memories, A and B for each color temperature of 3000K and 5600K.Also, when setting the AWB, the Zebra indicator appears to show the white area being used by the AWB system. If it doesn't work (NG - No Good), the viewfinder indicates if the color temp was too high or too low (H. TEMP or L. TEMP.)
Data Files
To enhance versatility, lens data files and scene data files are provided. A lens file stores data for max. 8 lenses to compensate for differences in lens optical characteristics, such as shading or color balance, and lens extender condition. A scene file stores camera settings for up to 8 different shooting conditions.
A low center of gravity camera design
Ikegami's long and rich experience in professional TV camera design has enabled us to produce a one-piece camera + recorder with excellent ergonomics and very good weight balance for the comfort of the operator.
Specially designed Shoulder Pad
A newly and specially designed shoulder pad made of non-slip material makes camera work easier. The pad can be esily adjusted.
Convenient P. FUNC switch
P. FUNC (Personal Function) switch is provided for the most frequently used functions for the operator's convenience, such as control of scene file recall, Soft Detail, and Black Press/Black Stretch.
Rotary Encoders for easier Setup
On the lower side of the camera, 3 rotary encoders are provided for easier access to setup parameters. This allows camera settings and checkups even without a remote control panel.
Camera Menu
The camera incorporates a very practical menu system which is easy to navigate with a rotary encoder at the front of the camera. The menu can be customized for specific users by changing which control items are included.
Instant recall to the Factory Preset condition
Sometimes it is useful to be able to go back to the factory's original settings. The "initialize" function is provided to do this.
Return Video
In a multiple camera operation, return signals can be observed by simply using the RET button on the lens control. This is achieved by connecting RET video to genlock input and selecting as return source (menu).
Memory Card provision
A Smartmedia card slot is provvided in order to keep various camera setting parameters in a small memory card. Full camera set up, as well as scene file sets can be stored to and loaded from the card.
Various tally lights, even from the rear
In the VF, tally lights appear both above and below the picture. Rear tally lights on the VF and handle are also provided.
Slot for a built-in wireless receiver
A space for a wireless receiver is provided at the rear of the camera. This Ikegami standard Unislot for a radio microphone receiver avoids extra wiring and possible damage.
Battery bracket with extra connector for lighting
An Anton Bauer type battery bracket is provided. The bracket has an extra lighting connection and supports the digital battery remaining capacity indication.
Multi-core remote system compatible
A cost effective Multi-core cable remote system is available with the MA-400 control unit. This enables the one-piece camera recorder to be used in a production camera system.
DV output provision
An i.LINK (IEEE 1394/Firewire, DV 6P terminal) output is provided for connection to other DV base equipment and systems.
Full Range of Remote Control Panels
For flexibility in a video production environment, various types of remote control panels are available, ranging from basic operating control to sophisticated full set up control.
RCP-50(RM-50) | RM-11 |
Автоматический перевод на русский язык:
Описание: Подробности:
При HL-DV7W, природно-поиск, высокое качество видео, приобретенные цифровой обработки ICs (ASICS) в цифровой форме, записанные на компакт-DVCAM ленте без потери качества изображения. Поскольку это может захватить до 184 минут в кадры с одной ленте (стандартного размера), он может устранить времени, неудобства, связанные с лентой замену в течение долгих часов на местах производства.
Дополнительную подробную информацию:
нового цифрового процесса LSI
Новые цифровые процесс БИС (ASIC) принимается для производства высококачественного видео в том числе шесть - оси линейных матричных Система для точной настройки цвета в соответствии с требованиями эфир.
DVCAM FORMAT
Высокие качество изображения цифровых компонентов
Запись в формате DVCAM является цифровая система сигнала яркости (Y) и цвета Разностные сигналы (RY, BY).
Цифровой PCM Audio System
двух режимов выбирается между 2CH (частотой дискретизации 48 кГц) и 4Ч (32kHz частота), которые могут быть полезны для аудио после записи (перезаписи).
Лонг записи Часы
Стандартные размеры кассет имеют макс. 184 минут записи, а мини-кассеты имеют макс. 40 минут записи. и nbsp;
HL-DV5
ЭКСПРЕССИИ
Preset и переменных Ставни
Предварительно затвора имеет шесть скоростей (1 / 100, 1 / 120, 1 / 250, 1 / 500, 1 / 1000, 1 / 2000 секунды) и переменной скоростью могут быть установлены и между 1/60.3 1 / 787 секунды (1/50.3 и 1 / 781 для PAL).
Различные параметры ГАММА
не только 4 вида ГАММА характеристиках выбираемых (OFF/0.35/0.4 / 0.45), а гамма-кривая схема с X5 первоначального получить также по выбору определенных эфир требования.
Удобный фильтр связано Белый Остаток
Камера имеет в общей сложности 8 AWB памяти пресетов, A / B-канал для каждого фильтра. ДСА связан с фильтром и автоматического изменения баланса белого, когда фильтр изменения.
OFF: 2 воспоминания о A и Бон - POS: 2 воспоминания, A и B для каждого фильтра
(8 каналов по 3000K, 5600K 1/16ND, 5600K, 5600K 1/64ND) ON - TEMP: 2 воспоминания, A и B для каждой цветовой температурой 3000K и 5600K.Also, при установлении AWB, зебры появится индикатор для отображения белый области используется ДСА системы. Если он не работает (NG - No Good), видоискатель показывает цвет, если температура была слишком высокой или слишком низкой (Х. Л. или TEMP TEMP.)
данных
Для повышения универсальности, объектив данные файлы и файлы данных сцена предоставляются. А объектив файл хранит данные по макс. 8 линз для компенсации различий в объектив оптические характеристики, такие как затенение или цветового баланса, а также объектив Extender состоянии. Сцена файле хранятся настройки камеры на срок до 8 различных условиях съемки. ОПЕРАЦИИ
Низкий центр тяжести камеры дизайн
Икегами в длительный и богатый опыт в профессиональных телекамерах дизайн позволяет нам производить один кусок камеры рекордера с отличной эргономикой и очень хороший баланс массы для удобства оператора.
многоядерных удаленной системы, совместимой
экономически эффективный Multi-кабеля удаленной системе можно получить в MA-400 блок управления. Это позволяет, с одной части камеры рекордер будет использоваться в производстве камера системы.