Description:
10 inch Broadcast Color Monitor
Features:
- Reso. 450 TV lines or more horizontal resolution
- BFS (Beam Feed-Back System) and Comb Filter
- Composite Video, Y/C, RGB or Component inputs
- D1/D2/D3 Input (Option)
- NTSC/PAL Mode Selection
- Screen aspect ratio of 4:3/16:9 switchable from front panel.
Specifications:
GENERALInput Voltage100V- 120V AC ± 10%, 50/60Hz, Single Phase (JPN, USA)
200V-240V AC ± 10%, 50/6OHz, Single Phase (EUROPE)
(Switchable from the internal connector)Power ConsumptionApprox. 40W (Standard)Ambient Temperature0°C- +40°C, 90% or less relative humidity (non-condensing)Dimensions222(W) x 213(H) x 352(D) mm (8.7 x 8.4 x 13.9 in.)WeightApprox. 10kg (22 lbs)RATINGInput SignalVideo: 2 inputs
Y/C: 1 input
RGB/Y, PB, PR: 1 input (Swichable at rear panel)
Digital Video: 1 input (OPTION)
Sync: 1 inputInput LevelVideo Signal : Composit 1.0Vp-p / Non Composit 0.7Vp-p
Y/C Signal : Y Signal 1.0Vp-p / C Signal 0.286Vp-p (burst level)
RGB or Y, PB, PR :
(RGB Signal)
G signal 1.0Vp-p (Sync on Green) or 0.7Vp-p / R/B signal 0.7Vp-p
(Y, PB, PR Signal)
N10/SMPTE Format / Y 1.0Vp-p(SynconGreen) or 0.7Vp-p
Setup: 0Vp-p / Sync: 4Vp-p ± 2Vp-p
PB/PR: 0.525Vp-p
Digital Video:
Dl:CCIR Rec601 (4:2:2 Format) / D2/D3: SMPTE standard
Sync Signal : Composite Sync 4Vp-p ± 2Vp-pConnectionVideo/RGB or Y, PB, PR:
Bridging BNC connectors, high impedance with termination swich
Y/C: 4 pin plastic connector, single end.
75 ohms terminated.
(7 pin metal connectors are OPTION)Remote Controlsa) Video input select (A/13/YC/RGB or Y, PB, PR, Digital)
b) COLOR/MONO seiect
c) Tally (ON/OFF)
d) 16:9
e) SYNC INT/EXTPERFORMANCECRTIn-line gun, Dot-shadow mask, medium resolution CRTMask Pitch0.28mmResolution (at center)450TV linesVIDEO SIGNAL SYSTEMFrequency ResponseMeasured with Aperture Gain 0
60Hz - 5MHz: flat within + 1/-3dBChrominance Rejection Less than -24dB (with aperture correction 0)Ratio NoiseCoherent noise: Less than -40dB
Other noise: Less than -50dBCOLOR SIGNAL SYSTEM Demodulation AxisR-Y, B-Y SystemFrequency Response3.58MHz +/-0.5MHz +1/-3dB
(measured at chroma output test point)SYNC SYSTEM Sysnc Stability Stability of synchronization will be met for the following conditions.
a)Internal Sync
Video input level within ±6dB against the rated value of 1.0Vp-p
b)External Sync
Sync Signal input level of 1.0 - 8.0Vp-pAFC Time ConstantsSLOW: Approx. 2.0msec.
FAST: Approx. 0. 5msec.DEFLECTION SYSTEMScanning FrequencyHorizontal: Nominal 15.734kHz
Vertical: Nominal 59.94kHzScanning AmplitudeNormal Scan :
Overscan is 1% of CRT effective area with an aspect ratio of 4:3
Underscan : - 14% of normal scanGeometry and linearityLess than 2% of picture heightConvergence ErrorCenter:
Inside a circle with diameter of 80% of picture height: Less than 0.5mm
Corner:
Outside area of picture center Less than 1.2mmHIGH VOLTAGETolerance18kV ± 1 kVRegulation±5% over the range of 0 - 300uA referred to 100uAOPTIONDK1071 D1Digital Kit
DR-1016A Rack mount adapter
DK1072N/P D2(D3)Digital Kit
DC1071 DC12-24V Input Module
SF1071 Special Function Module
SRC301 Serial Remote Controller