Description:
2/3" 3CCD-FIT Broadcast Camera, 700 res.
Details:
Generic Picture shows a HL-55A with CA-95C Camera Adapter and lens.
Ikegami's new HL-55A, compact, lightweight camera, is designed for ENG and EFP use. This camera, built for rugged, professional broadcast use, employs newly developed Frame Interline Transfer (FIT) CCDs with 400,000 pixels, has absolutely no Fixed Pattern Noise (FPN), has dramatically reduced vertical smear, and enhanced resolution. The camera also contains an electronc six-speed shutter for improved dunamic resolution and slow-motion special effect. The HL-55A belongs to Ikegami's Unicam family of cameras, and is compatible with HL-55 and HL-95 accessories. Various operating systems, such as, stand-alone, on-board VCR, and multicore/triaxial cable extension can be configured around the HL-55A.
Features:
- Compact and lightweight
Use of high performance CCD pick-up devices enables lower weight and power consumption to be achieved.
Weight: 3.1kg (6.8 lbs) including a viewfinder
Power Consumption: 14W - High resolution and high S/N ratio
The high performance CCD pickup devices and most advanced circuit technology yield a substantial improvement in resolution, S/N ratio, and sensitivity. The HL-55A features a resolution of 700 horizontal lines, and a high S/N ratio of 62dB or better with performance superior to that of conventional cameras. - High sensitivity
The improvement in S/N ratio allows increased video gain of + 24dB, if necessary. An excellent minimum illumination of 7 lux with a- high quality image is possible. The gains on the three position selection switch can be set by internal links for values between 0 and + 24dB in 6dB steps. - Dynamic DTL
Dynamic DTL improves resolution and sharpness to ensure consistent images that are crisp and clear 'from center to corner. - White shading correction
There are white shading controls for red, green and blue. The correction level is automatically varied to give optimum correction when the lens extender is used. - Multi-speed electronic shutter
Featuring a multi-speed electronic shutter, the HL-55A has dynamic resolution even when shooting moving objects, such as in sporting events. - Horizontal DTL
Horizontal DTL correction is derived from an RGB mix making it possible to obtain sharp pictures at all times. - Auto highlight compression / knee aperture correction
Optimum dynamic range and excellent detail can be achieved in outdoor scenes with high contrast through auto highlight compression circuitry. The knee aperture-circuit provides additional correction to enhance resolution in the highlight areas. - Optics
Featuring a newly designed optical system with a high-sensitivity prism, the HL-55A has the excellent spectral characteristics of the HL- 79E and the HL-95. Ikegami's original CCD mounting technique, not only achieves precision CCD positioning, but also helps prevent from registration errors due to changes in temperature. - Low-pass filter
A newly developed optical low-pass filter offers considerable reduction in MOIRE, while making best use of the high modulation factor of the CCD's. - Auto black balance
Black level can be easily matched without instrumentation. - Audio level controller
VCR audio level can be adjusted as appropriate with the audio level controller, together with the audio level marker displayed in the viewfinder. - VF indicators
The camera and VCR operating conditions can be checked with the LEOs and character indicators in the viewfinder. - VF markers
Center and safety area markers can be displayed in the VF to facilitate framing the camera shot: These markers can be turned on and off as necessary. - Remote control
The HL-55A has a digital remote control terminal which can be used even when docked with a VCR. (The remote controller is an optional item.) - VCR interface
The HL-55A can be configured with on-board 1/2" broadcast VCR's, including Betacam and M II types. A compact VCR adaptor is used with the standard HL-55A to interface Betacam recorders. For dedicated camera recorder application, the HL-55A can be ordered (option) in Betacam version, eliminating the need for an adaptor. - Various functions which enhance
operational characteristics The HL-55A features a wide variety of additional functions including color bars, genlock circuit, and an audio monitor speaker, enabling it to be used in EFP applications as well as in ENG operation. An Auto Iris switch on the side of the camera allows the lens to be opened or closed one f stop above or below normal auto iris setting.
Specifications:
[ Mechanical ] Dimensions (WHD) 96x230x 155 mm
3.7x9.0x6.1 inches Weight 3.1kg (6.8lbs) (with 1.5" VF) Lens mount Bayonet (compatible with HL-95/79E) Optical filter 1 2 3 4 3000°K 5600°K 5600°K
+1/4ND 5600°K
+1/16ND [ Electrical ] DC input signal 12V (11-16V) Power consumption 14W External sync input
signal for genlock VBS 1Vp-p or BBS 0.45Vp-p Return video signal VBS or VS 1Vp-p MIC input -60dBm Tally input Power/Contact (with CA-95C) Intercom 2-wire/4-wire (with CA-95C) Gain switchable 0, +9, + 18dB (STD)
0, +12, +24dB
0, +6, + 12dB
0, +6, + 18dB * Selectable by internal links Signal to noise ratio 62dB (NTSC) Sensitivity 2000 lux @ f8
Under the following condition
Color temperature 3200°K
Reflectance 89.9%
Gain 0dB
Gamma Linear
Aperture, Detail, Matrix All off
Bandwidth 4.2MHz
Resolution H: 700TVL
V: 400TVL Registration 0.05% or less-all zones (excluding lens) Video output signal VBS 1Vp-p, 75 ohm, 1 output
Component output 1 ch
R.G.B output 1ch VF video R + G + B (normal) or Monitor output signal
selected by the monitor switch Monitor output signal R, G, B, R-G, B-G, R+G+B, ENC Shutter speeds 1/100, 1/120,1/250, 1/500, 1/1000, 1/2000 second CA-95C Camera Adaptor Dimensions (WHD) 96 x 250 x 115 mm
3.8 x 9.8 x 4.5 inches Weight 11kg. (2.4 lbs) Input signals External sync for genlock VBS 1Vp-p or BBS 045Vp-p Return video signal VBS or VS 1 Vp-p MIC -70 - -50dBm 200 ohm (balanced) DC input 12V (11-16V) Output signals Video Composite video
RBG video 1 output 75 ohm
Component Y, R-Y, B-Y
Audio -20dBm 600 ohm (balanced)
MA-95 Camera Adaptor Input signals Encoded video VBS 1Vp-p composite, 75 ohm RGB video Each 0.7Vp-p non-composite, 75 ohm MIC -50dBm (600 ohm, balanced) Incom -10 dBs (unbalanced) Genlock VBS or BBS 1Vp-p (75 ohm) (option) Weight 1.2 Kg (2.6 lbs) Power DC + 12V Dimensions (WHD) 96 X 250 X 168 mm
3.8 X 9.8 X 6.6 inches MA-79 Base Station Input signals Genlock VBS 1Vp-p or BBS 0.45Vp-p, 75 ohm/bridged Return video VBS 1Vp-p, 75 ohm/bridged Incom -10dB/600 ohm, balanced; 4-wire/2-wire Tally DC + 24V or Contact Closure Output signals Composite video VBS 1Vp-p/VB 0.85Vp-p, 75 ohm 2 outputs
RGB video Each V 0.7Vp-p, 75 ohm
Monitor R,G,B,R-G,B-G,R + G + B,SEQ
Audio -20dBm/600 ohm, balanced
Incom -10dBm, 600 ohm, balanced, 4-wire/2-wire Power requirement AC100/117/220/240V 50/60Hz DC12V Power consumption AC150VA, DC12A (Cable 300m) Dimensions (WHD) 215 X 177 X 349 mm
8.5 X 7.0 X 13.7 inches Weight 12 Kg (264 lbs) TA-55A Base Station Input signals Genlock VBS 1Vp-p or BBS 0.45Vp-p, 75 ohm/bridged Return video VBS 1Vp-p, 75 ohm/bridged 2 outputs (bridged) Incom 0dBs, 10k ohm 4-wire balanced (standard)
-20dBs 600 ohm 2-wire balanced (option)
1Vp-p 200 ohm unbalanced RTS switchable Tally Contact/Power (DC24V Max) P.G.M 0dBs 10k ohm balanced Output signals Composite video VBS 1Vp-p/VB 0.85Vp-p, (75 ohm, positive 2 outputs) Chromakey VS 1 Vp-p or V 0.7Vp-p (75 ohm, positive) 1 output Audio 0dBm 600 ohm unbalanced Incom 0dBs, 10k ohm 4-wire balanced (standard)
-20dBs 600 ohm 2-wire balanced (option)
1 Vp-p 200 ohm unbalanced RTS switchable Tally Contact Dimensions (WHD) 200 X 150 X 300 mm
7.9 x 5.9 x 11.8 inches Weight 5.5 Kg (12.1 lbs) TA-55A Camera Adaptor Input signals Genlock VBS 1Vp-p/BBS 0.45Vp-p, 75 ohm 1 output MIC -60dBm balanced Output signals Composite video VBS 1Vp-p 75 ohm 1 output RET VBS 1Vp-p 75 ohm 1 output External VTR input/output 26 pin VTR connector Incom Incom ENG 1 output
MIC (carbon) -16dBs
PHONE 0dBs Dimensions (WHD) 96 X 228 X 153 mm
3.8x9.0x6.0 inches Weight 1.8 Kg (4.0 lbs)